Can an EP have 7 songs?

Can an EP have 7 songs?

If a product contains four to six songs, and has a total duration of 30 minutes or less, it is generally classified as an EP. Therefore, an album is typically seven songs and runs over 30 minutes. However, a three-track release can also be specified as an EP, if the artist or label nominate this as the product type.

What the difference between 7 and 12 vinyl?

12-inch vinyl record: A 12-inch(30 cm) vinyl record plays at 33 RPM. This typically stores up to 22 minutes of music on each side. 7-inch vinyl record: A 7-inch(18 cm) vinyl record plays at 45 RPM. This normally fits around five minutes of music on each side and is used for singles.

What are 12 inch records called?

LPs

Can you play 7 vinyl on a 12 player?

All record players do not play every single size of vinyl record. All record players will play the two most common sizes of vinyl record, those being 12-inch and 7-inch, but it is far less likely they will be able to play a 10-inch record.

What speed do I play my vinyl?

Vinyl records are produced to be played at one of three speeds: 33 1/3 RPM, 45 RPM, and 78 RPM. You will almost never deal withrds, so don’t worry about that. Most full-size 12-inch records will be 33 1/3 RPM, though some — mainly EPs and maxi-singles — will be at 45 RPM.

What does 2 LP mean?

The format of 2xLP simply means that there are two LP records. Album means that they each have the format ‘Album’ – it doesn’t differ between a single album over multiple records or multiple albums on individual records. The Box Set tag shows that they are boxed together and index tracks separate the discs.

Why do records play at 33 rpm?

The original acceptance of 33 1/3 by RCA in 1931 was a compromise between sound quality – the slower the rotation, the poorer the sounds quality – and quantity of recording time. The original microgroove could hold 23 minutes of recorded music. This was a huge increase from the 5 minutes per side of the 78.

What is better 33 or 45 rpm?

Vinyl records sound better if they are cut at higher speeds. Through this process, records cut at 45rpm can sound more detailed and run a lower risk of distortion, noise, and other sonic artifacts that can occur during vinyl pressing than records cut at 33rpm. …

What happens if you play a 45 record at 33?

The tip mass of the stylus will probably erase the highest frequencies from the record if you play it back at 45 instead of 33. The tip mass of the stylus will probably erase the highest frequencies from the record if you play it back at 45 instead of 33.

What does 33 rpm mean?

Vinyl records come in three speeds: 33 1/3 rpm (often just called a “33”), 45 rpm and 78 rpm. The “rpm” is an abbreviation for “revolutions per minute” — an indication of how fast the record is meant to spin on the turntable.

How do you tell if record is 33 or 45?

12″ records that are albums (>20 minutes per side) are 33, 12″ records that are singles may be 33 if they are from the US or 45 if they are from Europe. 10″ records are usually 33, but there may be 45 as well. It is printed on the label.

Does playing a record at the wrong speed damage it?

Playing vinyl records at the wrong speed does not do any damage. The audio will not sound as intended, but there will be no lasting extra damage if the standard RPM speeds are used.

Why is it called 78 RPM?

As more and more audio manufacturers turned to producing record players, the idea of a 78 RPM turntable became the norm. This is because the 3600 RPM motor used within the turntable saw peak performance at 78.26 RPM. Eventually, this became the official record standard by 1925.

Why is vinyl called wax?

This was electroplated to make the metal parts to stamp finished records. Hence, for almost the first 50 years of recorded sound, including cylinders, wax was the media that took the original sound waves. Therefore the term “wax” came into popular use as slang for a record.

Why are vinyls black?

Carbon has conductive properties, so adding it to the PVC increases the overall conductivity of the material, lessening the accumulation of static, and therefore, dust, on a record. By coloring records black with carbon-based pigment, manufacturers ensure their records last longer and sound better.

Why are singles 45 rpm?

The most common form of the vinyl single is the “45” or “7-inch”. The names are derived from its play speed, 45 rpm, and the standard diameter, 7 inches. The 7-inch 45 rpm record was released 31 March 1949 by RCA Victor as a smaller, more durable and higher-fidelity replacement for the 78 rpm shellac discs.

What is the rarest 45 record?

Blues Collector and longtime Rare Records dealer John Tefteller won a recent eBay auction which featured a previously unknown and potentially one of a kind Blues 45 rpm record produced by the Sun label back in 1953.” I think I stole it,” said Tefteller of the record when the auction ended with his winning bid of …

Is 45 Revoluciones based on a true story?

Inspired by real events and set in the heart of 1960’s Spain, 45 RPM depicts the journey of music producer Guillermo Rojas and pop sensation Robert. Aesthetically, 45 RPM begins with a plethora of split-screen shots, so much so that the early episodes are actually pretty distracting because of it.

How much did a 45 rpm record cost in 1960?

In the 60’s LP’s cost $1.99 to $2., and 2.99 to $3.eo, at Korvette’s or at a record store, from what I remember. Singles were 69 cents.

How much did a single record cost in 1973?

More than this in 1980 if this was a special price… I think the first single I ever bought was 48p in 1973.

How much did an LP cost in 1975?

Not sure about the start of the decade, but I do remember that circa 1975 LPs were about 18 to 20 Dutch guilders. That’s about 8 or 9 euros, which, with today’s currency exchange, comes down to about 11 or 12 dollars.

How much did a 45 record cost in 1955?

Teenagers of the Fifties took to the portable, less-expensive format; one ad at the time priced the records at 65 cents each. One of rock’s most cataclysmic early hits, Bill Haley and the Comets’ “Rock Around the Clock,” sold 3 million singles in 1955.

Are 45 records worth anything?

Determine if it is a rare or valuable record. Rock and roll and R&B 45s with picture sleeves that were pressed in the 1950’s have a value of at least $10, with many being valued at more than $100. Rock and roll and R&B 45s with the cardboard sleeves are worth at least $20, with many being worth more than $200.

What are the most expensive 45 records?

The 10 most expensive vinyl records ever sold

• Frank Wilson: ‘Do I Love You (Indeed I Do) – £25,742.
• Tommy Johnson: ‘Alcohol and Jake Blues’ – $37,100.
• Aphex Twin: Caustic Window (test pressing) – $46,300.
• The Beatles: ‘Til There Was You’ (10” acetate) – £77,500.
• The Beatles: Yesterday & Today – $125,000.
• John Lennon & Yoko Ono: Double Fantasy – $150,000.

How much did a vinyl record cost in 1950?

So what did vinyl records cost in the 1950’s? The pricing for records in the 50s would vary depending on the musicians or how popular the song was. Commonly, records and pieces of vinyl cost a mere $0.r records and the latest releases were $1.25.