Can you put 351 heads on a 302?

Can you put 351 heads on a 302?

The 351 intake will not fit the 302 at all, it’s too wide. Early 351 heads had bigger valves but also a larger cumbustion chamber. Ford used to sell head bolts made for this. If the heads are for a later 351W, don’t even bother.

How much can you bore a 351 Cleveland?

The most you’re going to be able to get into a 351C is 408 ci with a 4.040-inch bore. Again, a 4.060- inch bore is discouraged unless you are very confident of a sonic check.

How can I tell if I have a 351 Cleveland?

DCook

1. The upper radiator hose goes into the BLOCK.
2. Eight valve cover bolts.
3. A Cleveland has a “2” or a “4” cast into one of the corners of the heads.
4. If you can see a casting number or ID tag, the 351C was last produced in ’74.
5. If you can measure deck height, the Cleveland is shorter at about 9.5″ vs.
6. Transmissions.

How much is a 351 Cleveland motor worth?

A bare 351C block and crank (nothing else) goes for over $500. A complete running engine at least $1200. The 4V heads alone would go for $300 – chamber.

How do you tell if you have 2V or 4V heads?

The 1975 LTD all came with 2V heads and a 4 Barrel carby. The 4V heads only go to 1974. The 4V heads have a 4 cast in a corner of the head just near the rocker cover, early ones have later they have 4 with a dot next to them, in that same spot early USA heads have a 2 or 2 with a dot.

What cars had a 351 Cleveland?

Ford kept the changes coming year to year, offering five different versions of the 351C in the 1970–73 Mustang.

• 1970 Ford Mustang 351C M-Code Mecum.
• 1970 Ford Mustang Mach 1 Mecum.
• 1971 Ford Mustang Boss 351 Mecum.
• 1971 Ford Mustang Boss 351C R-Code Mecum.
• 1972 Ford Mustang Mach 1 Mecum.
• 1972 Ford Mustang Mach 1 351C Mecum.

What transmissions bolt up to a 351 Cleveland?

The 351C shares the small block 302/351W bolt pattern while the 351M & 400 use the big block 429/469 bolt pattern and to the best of my knowledge all use the larger flywheel.

How much horsepower does a Ford 351 Cleveland engine have?

330 hp

Is a Ford 400 a good engine?

The 400 is a good engine. Only draw back that I found was not much aftermarket support and they have thin wall casting but are a lighter weight engine. I loved my 400 until I got my 390 I was never a fan of the 460.

Is the Ford 292 a good engine?

The 292 was available in Ford trucks through 1964. IMO the 292 is an excellent engine, considering the era. I have rebuilt a 312, which is basically the 292 block that Ford bored out a bit more, and put it in my Thunderbird.

How can you tell the difference between a 351 Windsor and a Cleveland?

On a Cleveland/Modified engine, the radiator hose (and thermostat housing) sticks vertically right out of the top of the engine block. Windsor engines have the radiator hose and thermostat installed into the intake manifold, where it exits from the front of the engine. Valve Covers.

How much horsepower does a 460 have?

365 horsepower

What is the best Ford Motor to build?

14 Best Engines Ever Built By Ford Motor Company

• 289 V8 Small Block. Advertisement.
• 427 V8 FE Medium Riser. Advertisement.
• 428 Cobra Jet. Advertisement.
• 5.0 EFI HO. Advertisement.
• Model T Engine. Any list of the best Ford engines wouldn’t be complete without the unit that started it all: the Model T engine.
• Ford 300 CID I6 Engine.
• 6.7-Liter Power Stroke V8.

Is a 460 a good motor?

It is a truck engine and you will find it up to any task you wish to do with it. It is a solid workhorse that you can have fun with if you like tons of power. I think it’s the best light truck engine ever devised.

How much is a 460 Ford engine worth?

rding to what has been done to it.

How long will a Ford 460 last?

You most likely can expect 200,000 miles, but like mentioned above you might not get a block with it.

What is the fuel mileage for a Ford 460 engine?

14.3 mpg

How much horsepower does a 1996 Ford 460 have?

245 horsepower

When did Ford stop making the 460?

1978

How much horsepower does a 429 boss have?

Horsepower. The cars were advertised at 375 bhp (380 PS; 280 kW) at 5200 rpm and 450 lb⋅ft (610 N⋅m) of torque at 3400 rpm.