How do I connect my Ingenico to WiFi?

How do I connect my Ingenico to WiFi?

Configure WiFi

1. When the device powers on and displays the splash screen (refer to the image.
2. Press the F button.
3. Press 0 on the keypad to enter 0-TELIUM MANAGER.
4. Press 3 on the keypad to enter 3-Initialization.
5. Press 2 on the keypad to enter 2-Hardware.
6. Press 5 on the keypad to enter 5-Wi-Fi.

How do I connect my card machine to my router?

Connect one end of a RJ-45 Ethernet network cable to the “LAN,” “RJ-45” or “Network” port on the rear of the credit card machine. Connect the other end of the Ethernet cable to an open port on the broadband router connected to the DSL modem.

How do I use an Ingenico card reader?

For a chip card, insert the card into the bottom of the Ingenico pin pad, chip first facing front of the reader. For the magnetic stripe card, swipe the card at the top of the Ingenico pin pad, magnetic stripe down facing front of the reader. The Converge mobile app will show that it is processing.

How do I install Ingenico card reader?

After the terminal is installed, Ascend’s options must be configured.

1. From the Ascend Desktop, click Options.
2. Select the Payment Processing topic.
3. Click the Pinpad Setup button.
4. In the Port field, enter 28.
5. Check Enable Ingenico Device.
6. Click the Save button.
7. Click the Pinpad Setup button again.
8. Click the Reboot button.

How do I reset my Ingenico card reader?

Try a soft reboot.

1. Hold down the clear button and the punctuation button (below the 9 key) at the same time for 3-5 seconds, until the terminal turns off.
2. Once off, hold the enter button until the terminal powers on.
3. Try the transaction again.

How do you set up a card machine?

Connect and charge

1. Connect the power. Connect the power lead to the base unit.
2. Plug the power lead into the mains. Remember to turn the power on at the wall.
3. Put your card machine on its base.
4. Leave it for a couple of hours.
5. Power up your card machine.
6. Pair your card machine and base unit.
7. Get to know your card machine.

How do I connect my Ingenico iPP320 to my computer?

Connect the Ingenico iPP320 terminal to your network Place your iPP320 terminal face down in front of you. Connect the HDMI end of its connection cable to the HMDI port at the top of the terminal. Optionally, screw in 2 screws to secure the connection cable and 1 screw to secure the back cover of the terminal.

How do I fix Ingenico?

Ingenico Troubleshooting

1. Unplug the power for your device and wait for 10 seconds. Try to reconnect after rebooting.
2. Ensure that all of the cables are connected and the battery pack is connected.
3. Ensure the phone line or internet connection is working.

How do I fix an alert irruption?

Alert Irruption Error Message Please ensure the card machine displays GPRS on the screen. Ensure network bars are displayed on the screen and check the amount of bars available (5 being extremely good). Most importantly, ensure the card terminal displays a network (Orange, EE, T-Mobile, O2, Vodafone or Datasim).

How do I reset my Ingenico 7000?

Press the red “X” key followed by the green enter key to save and reboot your settings.

How do I reboot my Eftpos machine?

To REBOOT, hold down both the [FUNC] and [CLEAR] keys on the terminal at the same time. To POWER OFF, power from the POS will need to be cut-off. The terminal can’t be shut down locally as it is powered via USB.

How do I restart my Verifone?

Power cycle the device:

1. Remove battery from the back and then replace.
2. Press and hold the green Enter key to restart the terminal.

How do I reset my Verifone keypad?

Press the number “4” on the terminal keypad or on the touch screen to select Reset Terminal. key to confirm.

What is Verifone password?

Vx520 Keeps Asking for a Password (Keyboard Locked) From the SoftPay home screen, press 8. (The SoftPay home screen displays the Sale, Refunds, and Void options). 2. On the keypad, enter the password: 1, alpha, alpha, 6, 6, 8, 3, 1.

How do I install Verifone MX915?

To add the Verifone MX915 terminal:

1. On the Profile screen, under Devices, tap Payment terminal.
2. Tap Add payment terminal…
3. Enter the terminal’s Name and tap Next.
4. Enter the Activation Code displayed on the terminal’s white idle screen.
5. Enter the terminal’s Terminal ID (optional) and tap Next.

How do I turn off my Verifone card?

The terminal is switched on by pressing the Enter key for a while or by connecting it to the power cord. To shutdown the terminal press the Cancel key until the terminal shuts down.

How do I clean my Verifone chip reader?

Verifone devices should only be gently cleaned using a lightly water-dampened, clean microfiber cloth with one or two drops of pH-neutral, non-scrubbing soap. Do not use solvents, harsh detergents, or abrasive cleaners.