How do you work a Timex Expedition Chronograph?

How do you work a Timex Expedition Chronograph?

To adjust chronograph hands:

1. PULL crown out to “B” position.
2. PRESS pusher “B” until the hand at the 10 o’clock eye resets to the.
3. PULL crown out to “C” position.
4. PRESS pusher “A” until the chronograph second hand resets to the.
5. PRESS pusher “B” until the hand at the 2 o’clock eye resets to the.

How do I change the day on my Timex Expedition watch?

Set the date and day on your watch.

1. Find the crown and pull it out of the watch to the middle position.
2. Turn the crown clockwise until you see the correct date.
3. If the date isn’t changing, pull the crown to the outer position and turn ahead by 24 hours.

How do you set a Timex Expedition Indiglo watch?

Push the “Indiglo” button on the bottom of the Expedition to illuminate the watch face. The face illuminates for three seconds. If other buttons are pressed while Indiglo is activated, the face stays illuminated for three more seconds. Push and hold the Indiglo button for four seconds to use the “Night-Mode” function.

How much is a Timex Indiglo WR 30m?

timex indiglo wr 30m Prices: $7.99 – $89.00 | MAVIN.

How do you turn off the alarm on a Timex Expedition watch?

The alarm of your Timex Expedition is turned off. To turn off the chime, replace step 2 with “Toggle the button 4 till the chime symbol goes off.”…To turn off the alarm:

1. Toggle the button 2, till the word ALARM blinks on the display.
2. Then press toggle buttons 3 and 4 simultaneously.
3. Press button 2 again.

How do I stop my shark watch from beeping every hour?

How do I stop the watch from beeping every hour? Answer: Press and hold the bottom right button; this displays the alarm. At the same time, press the bottom left to toggle the hourly chime.

Why do Timex watches tick so loud?

Loud ticking, other threads attest, can be down to resonance within the case. So perhaps Timex have particularly roomy or thin (or wrong frequency) cases. Fwiw my HMT watches are pretty loud as well as my Timex. The loudest though is the Volna, Vostok precision 2809 movement – not so much a tick as a detonation.

How do you reset a marathon watch?

Press and hold the “Set/Clear” button on the bottom right of the Timex Marathon. A message will appear reminding you to hold the button for two seconds. Press the “Start/Stop” button at the top of the watch to advance the hour until it reaches to the correct time.

How do I turn off the hourly chime on my Timex Indiglo?

This button is located in the same place on all Timex Indiglo models. However, on some models it is labeled as the “Alarm On” button. Hold the button down until the colon in between the hour and minutes on the display screen stays solid. This means that the hourly chime is turned off.

How do I turn off the alarm on my Timex t80?

Tap the “Mode” button in the bottom-left corner of the watch until “ALARM” appears. Tap “Stop/Reset” in the bottom-left corner of the watch; the various alarms scroll past. Stop at the alarm you are turning off. Press “Start/Split” beneath the LCD display to turn off the alarm.

How do you set a Timex t80?

1. SETTING THE WATCH.

1. First, find the regular time mode by pressing the MODE button until the time (with the date at the top) shows.
2. Press & hold the SET button until the word ENTER disappears and is replaced by the word TIME. Release that button.
3. Press either the MODE or the START/SPLIT button.

How do I set the day on my Timex analog watch?

Pull crown to “middle” position and turn CLOCKWISE until correct day appears. If day does not change, pull crown to “out” position and turn CLOCKWISE or COUNTER CLOCKWISE through necessary number ofods until correct day appears.

How do you set a Timex analog watch?

Turn the knob counterclockwise to move the date down in number. Push the crown knob all the way in to start the watch. Pull the crown knob completely out, if the day doesn’t change with the knob in the middle position, and cycle the time backward or forward through 24-hour periods until you arrive at the current day.

How do you reset a Timex chronograph watch?

TO ADJUST THE CHRONOGRAPH HANDS:

1. 1) PULL out CROWN to “C” position. 2) PRESS pusher “A” intermittently until the seconds.
2. sweep hand resets to “0” or 12-hr. position.
3. the 12 o’clock eye reset to “0” or 12-hr position.
4. NOTE: Make sure that the chronograph is stopped and reset before adjusting.

What are the 3 dials on a chronograph watch?

A chronograph watch typically has three dials to register the time elapsed – a second dial (also referred to as a sub-second dial), a minute dial and an hour dial.

How do you take the back off a Timex Expedition watch?

Make sure the little arrow on the back is aimed to the right. Then, insert a small flat head screwdriver into the notch on the edge, and lever the back open. Place the back to one side. Unscrew the clip holding the battery (if your model has a clip), and remove the battery.

What is the point of a chronograph watch?

A chronograph has three main functions: start (when it is activated), stop (when you take a reading) and return to zero (when it’s ready for re-use). These are operated by pushers on the side of the watch, which allow you to stop, start and reset without actually interfering with the watch itself.

How do I reset my chronograph to zero?

Pull the crown out fully, then keep pressing the top bottom to adjust the top dial until it reaches zero, and then the same with the bottom button to adjust the bottom dial. On some chronograph watches, you may need to pull the winder out just one click to adjust a specific dial.