How much horsepower does a 2004 Dodge Ram 4.7 have?
Plan
- 1 How much horsepower does a 2004 Dodge Ram 4.7 have?
- 2 How much HP does a 4.7 Magnum have?
- 3 How much does it cost to rebuild a 4.7 engine?
- 4 What is a 4.7 stroker?
- 5 How much boost can a stock Jeep 4.0 handle?
- 6 How many miles will a Jeep engine last?
- 7 How do you clean the throttle body on a Jeep JK?
- 8 How do you tell the difference between a 232 and a 258?
- 9 How much is a new engine for a Jeep?
- 10 Is the 3.8 a good engine?
How much horsepower does a 2004 Dodge Ram 4.7 have?
215 to 500 hp
How much HP does a 4.7 Magnum have?
General information
| Engine Specifications | |
|---|---|
| Engine model | Chrysler PowerTech 4.7L (Dodge 4.7L Magnum) |
| Power output | 238 PS (175 kW; 235 HP) at 4,-Output: 269 PS (198 KW; 265 HP) at 4,800 rpm |
| Torque output | 400 N·m (40.8 kg·m, 294.8 ft·lb) at 3,-Output: 447 Nm (45.59 kg·m; 329.89 ft·lb) at 3,200 rpm |
Is the Chrysler 4.7 a good engine?
As stated, the 4.7 is a good engine…if maintained correctly. Some inherent issues are present (cooling, valve cover leak, exhaust manifold, battery harness) and if taken care of, the engine will be strong well past 200K miles.
How much does it cost to rebuild a 4.7 engine?
Registered. I’d count on spending around $2500-3000 for a decent rebuild with a few performance parts thrown in.
What is a 4.7 stroker?
JEEP 4.7 STROKER | “THE OUTLAW” This Jeep 4.7 stroker nicknamed “The Outlaw” is a direct replacement for a Jeep 4.0 engine for vehicle years 1987-2004. She comes gun’s-blazing with 230 HP and 315 TQ. Convenience and reliability, great for towing, offroading, and everyday driving.
How much horsepower does a 4.0 straight 6 have?
190 horsepower
How much boost can a stock Jeep 4.0 handle?
The stock 4.0L rods can easily handle 400+hp and 6000+rpm. Other components in a stock 4.0L engine are likely to fail (e.g. snapped timing chain, cracked crankshaft rod journals) before the stock rods or rod bolts, and the stock composite head gasket will fail if subjected to more than 8psi of boost.
How many miles will a Jeep engine last?
A Wrangler can typically reach 280,000 miles before significant problems begin to surface. But well-maintained models exceed 20 years and over 400,000 miles. The Wrangler is built for the outdoors and designed to tackle tough terrain, contributing to its longevity.
What does a throttle body spacer do for a Jeep Wrangler?
The spacer is bolted on the back of the throttle body, downstream of the main airflow. This is strictly an aftermarket enhancement used to increase the fuel economy, torque and horsepower. It basically directs the flow of air into the manifold to maximize the volume that goes into the intake.
How do you clean the throttle body on a Jeep JK?
Use throttle body cleaner (or Sea Foam) to spray the assembly, then watch all the dirt and debris slide off. Spray it and wipe it as needed until you feel it looks clean.
How do you tell the difference between a 232 and a 258?
The only way to tell the difference between a 232 and a 258 is by the number on the block. There is no visual difference that I am aware of. If the engine is original to thever it would be the 258.
Are Jeep 4.0 engines reliable?
The 4.0 is reliable but so are most straight 6 cylinder engines, they just vibrate so much less than a V style engine that they don’t beat themselves to death. 300 straight 6 Fords will go forever. Newer V6 engines are much better than older ones, like the 4.3 Chevy.
How much is a new engine for a Jeep?
Probably about $3,000 – $4,000 if you pay a shop to do it. If the engine overheated, it’s probably just a warped head.
Is the 3.8 a good engine?
The 3.8 is a reasonable engine that gets the job done until you start adding big tires, lift kits, armor, etc which demand more power. At that point it becomes pedestrian at best.
