Should I buy an orbital sander?

Should I buy an orbital sander?

Advantages. The best feature of the orbital sander is its square shape, which allows it to get in corners and up against edges. You can also use regular sandpaper cut to fit rather than purpose-made random-orbit sanding disks. Orbital sanders aren’t overly aggressive, so it’s hard to remove too much material.

What type of sander is best for wood?

Random orbital sanders do the best job of finish-sanding wood. It’s hard to know what type of sander to buy for your projects. We’ll take the confusion out of buying a sander for finishing kitchen cabinets and explain why a random orbital sander is the best choice.

Can I use an orbital sander on wood?

Orbital sanders can be used for a variety of sanding and smoothing needs. These units are lightweight, easy to use and offer a swirl-free finish on surfaces like wood, metal and plastic.

How do I choose an orbital sander?

When choosing a random-orbit sander, look for a motor size, body configuration, and pad size (5- or 6-inch) that fits your workload. A decent palm-size unit will cost between $50 and $100, while heavy-duty right-angle or in-line ones cost $150 to $200.

Can you use an orbital sander on drywall?

The orbital sander will effectively smooth out the drywall surface. When you finish using the orbital sander, finish by hand sanding, especially over rougher surfaces. This will ensure a smooth, consistent, and swirl-free finish on your drywall surface.

Is a drywall sander worth it?

It is durable, cost-effective, easy to install and repair. It is no wonder why it is the first choice for contractors. However, to do this type of work, you will probably need a drywall sander or a wall straightener.

Is a palm sander the same as an orbital sander?

The Main Differences Between Orbitals vs Palm Sanders are: Orbitals are heavy duty tools, whereas Palm Sanders are smaller and more lightweight. Orbitals are better for working on large pieces, whereas Palm Sanders is best for small pieces.

Is an electric drywall sander worth it?

A good power drywall sander can cost between $500 and $1200 dollars. The sanders do make the work easier and do reduce the amount of dust ,but if they don’t help complete the job significantly faster than I just can’t see too many people buying the tools unless dust control is a must.

Can you vacuum drywall dust?

Avoid using your household vacuum on drywall dust unless it has a heavy-duty HEPA filter. According to Review This, the filters in most household vacuums will get clogged with drywall dust. A shop vac is always a better option for these fine particles.

Can I rent an electric sander?

Types of Tools and Equipment for Rent From power tools like drills, sanders and saws to outdoor tools like pressure washers, lawn mowers and even concrete tools, checking off your to-do list has never been easier. We have indoor tools, including floor-care equipment, to meet those needs, too.

Is it safe to sand wood inside?

Can you sand furniture indoors? When sanding indoors, dust is always going to be a factor but I will show you can minimize dust with a dust catcher or be attaching your sander to a vacuum cleaner. In most circumstances, I’d recommend sanding outdoors or in your garage. However, sometimes sanding outside is unavoidable.

What grit sandpaper should I use to sand spackle?

Sand the edges of the spackled area lightly with 120-grit or 150-grit sandpaper, or a sanding sponge.

Should I wipe down drywall after sanding?

It is important to perform drywall cleaning after sanding to remove the dust before painting. Otherwise, it may interfere with paint adhesion. Additionally, the sooner you remove this dust, the less chance it has of spreading throughout the house.

How do you smooth out spackle?

Push the knife firmly at an angle and then scrape carefully up and down. You can also use some fine-grit sandpaper to smooth things down. Then, wipe it with a damp cloth to get rid of any remaining residue or dust.

How many coats of spackle do you need?

Spackling will often require more than one coat with some drying time in between. Prior to painting the spackling will need to be sanded.

Can you only do 2 coats of drywall mud?

Applying Mud You need to lay one layer of mud onto the bare wall to hold the tape, and you can usually lay another immediately after you lay the tape and scrape it. After that coat dries, you topcoat with a third layer, using a wider knife than you used for taping.

Should I sand between coats of spackle?

Drywall joints require several coats of spackle and finish sanding. For all spackling tasks, it is important to let each coat dry thoroughly between applications of more spackle. You can also use a sanding pole to smooth and flatten a dried spackle joint before applying additional coats.

Do you sand drywall between coats?

After the coat dries approximately 24 hours, sand the area. Then sand the rest of the joint lightly in order to make smooth. Be careful not to sand too much off. If too much is sanded off, you will need to apply additional coats of compound.

Why did my drywall mud crack?

The most common cause of cracking in freshly applied drywall mud is when it is applied too thickly. This exacerbates the issue with evaporation-based drying and can even crack curing compounds. Past this point, applying more drywall mud will cause the cracking to worsen if done improperly.

Is mesh or paper tape better for drywall?

Most drywall tradesmen will say that paper tape is stronger than mesh drywall tape. Paper tape is better at preventing cracking along drywall seams. Paper tape folds easily and therefore is easily applied to corners to allow for crisp inside 90° corners.

Should you wet drywall tape before applying it?

Dampen, but don’t soak, the tape in a bucket of water. Wetting the tape before you embed it in the joint compound can help eliminate troublesome bubbles that show up after the joint dries. Keep a bucket of water nearby and quickly run each piece of tape through it before applying the tape to the wall.

How big of a gap can you fill with drywall mud?

Another situation that calls for filling is a drywall gap between sheets that’s more than about 1/2 inch wide. If you tape over a wide gap like this without filling it first, the tape will flex, and the joint compound covering it will chip away.

What happens if you don’t tape drywall seams?

Drywall tape does not offer an mechanical strength at all. If you skipped the drywall tape and just used joint compound to fill in the seams, the seams would become visible again after the compound dried. Joint compound shrinks!

Does mesh tape crack?

The fiberglass mesh tape is more likely to allow cracks to form over time because it is not as strong as paper tape. Fiber glass mesh is designed to be used with fast setting mud. The final coat should be regualr mud which is a bit easier to sand.