What is a lockout system?

What is a lockout system?

Lockout is defined in the Canadian standard CSA Z460-13 “Control of Hazardous Energy – Lockout and Other Methods” as the “placement of a lockout device on an energy-isolating device in accordance with an established procedure.” A lockout device is “a mechanical means of locking that uses an individually keyed lock to …

What is a lockout/tagout system?

The term “lockout tagout” refers specifically to procedures used to ensure that equipment is shut down and inoperable until maintenance or repair work is completed. They are used to keep employees safe from equipment or machinery that could injure or kill them if not managed correctly.

What is the difference between lockout and tagout?

Lockout means to place a lock on a device that prevents energy release. Tagout means to place a tag on a switch or other shut off device that warns not to start that piece of equipment.

Who can remove a lockout/tagout device?

Lockout or tagout device removal: Each lockout or tagout device must be removed from the energy-isolating device by the employee who applied the device [.147(e)(3)].

What is the purpose of lockout-tagout?

Lockout-Tagout Interactive Training Program: Tutorial – Purpose. What is the purpose of the standard? To prevent injury to servicing and/or maintenance employees due to the unexpected energization or startup of machines and equipment, or release of stored energy.

How do you do a lockout/tagout procedure?

Lockout Tagout Procedure in 8 Simple Steps

1. Find the procedure to be used.
2. Notify anyone affected by the lockout tagout.
3. Locate all listed energy sources.
4. Shut down the machine or equipment.
5. Lockout and tag all energy isolating devices.
6. Release any stored energy (steam, hydraulic, etc.).
7. Operate controls to test disconnects.
8. Return controls to off position.

How do you write a lockout/tagout procedure?

Write lockout tagout procedure in 8 steps

1. Step #1: Preparing for shutdown.
2. Step #2: Performing the shutdown.
3. Step #3: Locating and disconnecting all energy sources.
4. Step #4: Placing locks and tags.
5. Step #5: Releasing or blocking any stored energy.
6. Step #6: Verifying the lockout.
7. Step #7: Performing scheduled servicing.

What is the third step in the OSHA lockout/tagout procedure?

Eight Steps for Safer Lockout/Tagout Programs

1. Step 1: Detailed procedures for equipment.
2. Step 2: Notify affected employees.
3. Step 3: Shut down equipment properly.
4. Step 4: Disconnect all primary energy sources.
5. Step 5: Address all secondary sources.
6. Step 6: Verify the lockout.
7. Step 7: Keep it in force during shift changes.
8. Step 8: Bring the equipment back on line.

How do you implement a Loto system?

Follow the given steps and perform LOTO consistently and properly.

1. 1: Evaluate and Plan.
2. 2: Equipment Appraisal.
3. 3: Machine Specific Procedures.
4. 4: Assessment of isolation devices.
5. 5: Procedure awareness & Training.
6. 6: Implementation.
7. 7: Review your program regularly.

What is the first step in lock out/tag out?

An effective lockout/tagout program should include the following eight steps.

1. Step 1: Detailed procedures for equipment.
2. Step 2: Notify affected employees.
3. Step 3: Shut down equipment properly.
4. Step 4: Disconnect all primary energy sources.
5. Step 5: Address all secondary sources.
6. Step 6: Verify the lockout.

What is the final step in a lock out?

Steps of a lockout/tag out program include:

1. Prepare for shutdown.
2. Notify all affected employees.
3. Equipment Shutdown.
4. Isolation of system from hazardous energy.
5. Dissipation (removal) of residual or stored energy.
6. Lockout/Tag out.
7. Verify Isolation.
8. Perform Maintenance or Service Activity.