What is the proper height for curtains?

What is the proper height for curtains?

four to six inches

How far should curtain rod extend past bracket?

Extending the rod three to six inches beyond the frame on each side makes a window feel grander and allows extra light to stream in when the curtains are open (the fabric hangs against the wall without blocking the glass).

How far past the window should curtains hang?

four to 10 inches

What do you call curtain tie backs?

Hardware forms, often called drapery hooks or curtain hooks, are usually U-shaped pieces of metal, sometimes highly decorative, though other materials such as antler might be used. One leg of the “U” is fixed to the wall and the curtain is pulled over the other leg to secure it.

How should tie backs look?

Tieback height can drastically change the look and feel of a window. Generally, curtain tiebacks look best when placed one-third of the way from the top or bottom of the curtain. Tiebacks are both functional and decorative elements of a window treatment.

How high do curtain tie backs go?

There’s no hard-and-fast rule, but I have found that roughly 85 to 90 cm (33 to 35 inches) from the floor is the perfect height for tie-backs. Something to keep in mind: if you want a more tailored look, you may want to place your tie-backs slightly higher to reduce the swag effect.

How do tie backs work construction?

A Helical Tieback or Soil Screw is a segmented deep foundation system with helical bearing plates welded to a central steel shaft. Load is transferred from the shaft to the soil through these bearing plates. Tieback anchors are installed by rotating the anchors into the ground with rotary drilling equipment.

What is tie back?

1 : a decorative strip or device of cloth, cord, or metal for draping a curtain to the side of a window. 2 : a curtain with a tieback —usually used in plural.

What are rakers?

Gill rakers in fish are bony or cartilaginous processes that project from the branchial arch (gill arch) and are involved with suspension feeding tiny prey. Rakers are usually present in two rows, projecting from both the anterior and posterior side of each gill arch.

How do shoring tiebacks work?

A tieback machine drills an angled hole through the wall, puts a large steel cable in the hole, and then pumps concrete into the hole to backfill it. The concrete bonds to the cable and acts in friction against the soil/rock to resist being pulled out. A raker is basically an enormous kickstand for your shoring wall.

What is a soldier pile?

Soldier Piles are steel H piles that are vertically driven or drilled into the earth at regular intervals prior to excavation. As excavation progresses in stages, horizontal lagging in the form of timber or precast concrete is added behind the flanges to create the Soldier Pile and Lagging Wall.

What is a tie back sentence?

Writing the Body of the Essay Remember, the topic sentences, explanation and evidence all must relate to and tie back to your thesis statement. T = Topic Sentence – A clear sentence that tells the reader the main idea of your paragraph. It should tie back to one of the points in your thesis.

What is a raking shore?

Raking shores – A raking shore is a structure that is used to support any walls that aren’t structurally sound within a building. Using cleats, needles, sole plates, inclined members, bracing and wall plates, they help to keep walls intact to minimize any damage to the existing building or structure.

What is a dead shore?

: an upright shore left in a wall after completion of repairs or alterations.

What is vertical shoring?

Hydraulic Vertical Shores are a lightweight shoring device that can be installed by a single worker as fast as the trench is excavated. Vertical shores are used in linear production applications, irregular size pit applications and other situations requiring spot bracing for repairs, inspections, etc.

What are the types of shoring?

Types of shoring

• Raking shoring.
• Flying shoring.
• Dead shoring.

Is shoring permanent?

Shoring walls can be permanent or temporary. Temporary applications are typically supplemented with concrete walls once the earth has been properly retained.

What is shoring a house?

Shoring is the process of temporarily supporting a building, vessel, structure, or trench with shores (props) when in danger of collapse or during repairs or alterations. Shoring comes from shore, a timber or metal prop. Shoring may be vertical, angled, or horizontal.

What is shoring strutting?

When trenches have to be dug in loose ground it is necessary to support the sides of the excavation by timbering and shoring. The poling boards P P are often in short lengths of about 3 feet, so that no greater depth has to be excavated before they can be inserted. …